Dell Inspiron 580 Скачать руководство пользователя страница 10

Страница: 10 / 39

Back to Contents Page

Battery

Dell™ Inspiron™ 580 Service Manual

Removing the Battery

Replacing the Battery

Removing the Battery

Record all the screens in System Setup (see

System Setup

) so that you can restore the correct settings after the new battery has been installed.

Follow the procedures in

Before You Begin

Remove the computer cover (see

Removing the Computer Cover

Locate the battery socket (see

System Board Components

Press the battery release lever to remove the battery.

Replacing the Battery

Follow the procedures in

Before You Begin

Insert the new battery (CR2032) into the socket with the side labeled "+" facing up, and press the battery into place.

Replace the computer cover (see

Replacing the Computer Cover

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING:

A new battery can explode if it is incorrectly installed. Replace the battery only with the same or equivalent type recommended by the

manufacturer. Discard used batteries according to the manufacturer's instructions.

WARNING:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING:

Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

If you pry the battery out of its socket with a blunt object, be careful not to touch the system board with the object. Ensure that the

object is inserted between the battery and the socket before you attempt to pry out the battery. Otherwise, you may damage the system board by
prying off the socket or by breaking circuit traces on the system board.

1 battery release lever

Содержание Inspiron 580








































Результаты поиска

Содержание Inspiron 580

Отзывы:

Похожие инструкции для Inspiron 580

Бренды по названию

Популярные бренды

Dell Inspiron 580, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 580

Отзывы:

Похожие инструкции для Inspiron 580

Бренды по названию

Популярные бренды