Dell Inspiron 580 Скачать руководство пользователя страница 24

Страница: 24 / 39

Back to Contents Page

Front I/O Panel

Dell™ Inspiron™ 580 Service Manual

Removing the Front I/O Panel

Replacing the Front I/O Panel

Removing the Front I/O Panel

Follow the procedures in

Before You Begin

Remove the computer cover (see

Removing the Computer Cover

Remove the front bezel (see

Removing the Front Bezel

Disconnect all the cables that are connected to the front I/O panel from the system board connectors. Note the routing of all cables as you remove them
so that you can re-route them correctly after installing the new front I/O panel.

Remove the screw that secures the front I/O panel to the chassis.

Carefully slide the front I/O panel down and out of the front I/O panel clamp slot.

Replacing the Front I/O Panel

Follow the procedures in

Before You Begin

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING:

To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.

WARNING:

Do not operate your equipment with any cover(s) (including computer covers, bezels, filler brackets, front-panel inserts, etc.)

removed.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

NOTE:

Note the routing of all cables as you remove them so that you can re-route them correctly when installing the new front I/O panel.

CAUTION:

When sliding the front I/O panel out of the computer, be extremely careful. Carelessness may result in damage to the cable

connectors and the cable routing clips.

1 front I/O panel clamp slot 2 cables 3 front I/O panel clamp

4 front I/O panel

5 screw

CAUTION:

Take care not to damage the cable connectors and the cable routing clips when sliding the front I/O panel into the front I/O panel

clamp slot.

Содержание Inspiron 580








































Результаты поиска

Содержание Inspiron 580

Отзывы:

Похожие инструкции для Inspiron 580

Бренды по названию

Популярные бренды

Dell Inspiron 580, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 580

Отзывы:

Похожие инструкции для Inspiron 580

Бренды по названию

Популярные бренды