Dell Inspiron 5494 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 79

background image

4. Replace the screw (M2x3) that secures the solid-state drive/Intel Optane to the palm-rest and keyboard assembly.
5. Tighten the captive screw that secures the solid-state drive shield/Intel Optane shield and solid-state drive/Intel Optane to the palm

rest and keyboard assembly.

NOTE:

The solid-state drive shield/Intel Optane shield is only available for computers that are shipped with PCIe or

NVMe solid-state drive/Intel Optane.

Post-requisites

Hard drive

Removing the hard drive

If your computer is using a SATA storage device accelerated by Intel Optane memory, disable Intel Optane before removing the SATA
storage device. For more information about disabling the Intel Optane, see

Disabling Intel Optane

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

CAUTION:

Hard drives are fragile. Exercise care when handling the hard drive.

CAUTION:

To avoid data loss, do not remove the hard drive while the computer is in sleep or on state.

Prerequisites

.

Procedure

1. Open the latch and disconnect the hard-drive cable from the system board.
2. Remove the two screws (M2x3) that secure the hard-drive assembly to the palm rest and keyboard assembly.
3. Lift the hard-drive assembly along with its cable off the palm rest and keyboard assembly.

30

Removing and installing components

«
...
28
29
30
31
32
...
»

Содержание Inspiron 5494
















































































Отзывы:

Нет отзывов

Похожие инструкции для Inspiron 5494

Бренд: Hama Страницы: 22

TravelMate P273-M

Бренд: Acer Страницы: 85

TravelMate P645-S

Бренд: Acer Страницы: 99

TravelMate 6252

Бренд: Acer Страницы: 100

TravelMate 250P series

Бренд: Acer Страницы: 100

Бренд: Acer Страницы: 15

BRnR 4000 4005WLMi

Бренд: Acer Страницы: 39

Бренд: Acer Страницы: 95

Бренд: Acer Страницы: 90

Бренд: Acer Страницы: 106

Aspire TimelineX 3820

Бренд: Acer Страницы: 313

Бренд: Acer Страницы: 81

Бренд: Fujitsu Страницы: 128

ESPRIMO Mobile V6505

Бренд: Fujitsu Страницы: 28

Бренд: ThinkPad Страницы: 118

Бренд: Clevo Страницы: 148

EasyNote SB Series

Бренд: Packard Bell Страницы: 23

Бренд: Durabook Страницы: 98

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды