Dell Inspiron 5494 Скачать руководство пользователя страница 19

Страница: 19 / 79

Replacing the wireless card

NOTE:

Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in

Before working inside your computer

. After working inside your computer, follow the instructions in

After

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

Procedure

CAUTION:

To avoid damage to the wireless card, do not place any cables under it.

1. Connect the antenna cables to the wireless card.

The following table provides the antenna-cable color scheme for the wireless card that is supported by your computer.

Table 2. Antenna-cable color scheme

Connectors on the wireless card

Antenna-cable color

Main (white triangle)

White

Auxiliary (black triangle)

Black

2. Slide and replace the wireless-card bracket on the wireless-card.
3. Align the notch on the wireless card with the tab on the wireless-card slot and insert the wireless card at an angle into the wireless-

card slot.

4. Replace the screw (M2x3) that secures the wireless-card bracket to the wireless card and the palm rest and keyboard assembly.

Removing and installing components

Содержание Inspiron 5494
















































































Результаты поиска

Содержание Inspiron 5494

Отзывы:

Похожие инструкции для Inspiron 5494

Бренды по названию

Популярные бренды

Dell Inspiron 5494, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 5494

Отзывы:

Похожие инструкции для Inspiron 5494

Бренды по названию

Популярные бренды