Dell Inspiron 3910 Скачать руководство пользователя страница 65

Страница: 65 / 75

Table 12. System setup options—Passwords menu (continued)

Passwords

Digit

Enforces password restriction that the password must contain at least one
digit.

Default: OFF

Special Character

Enforces password restriction that the password must contain at least one
special character.

Default: OFF

Minimum Characters

Controls the minimum number of characters allowed for password.

Default: 04

Password Changes

Enable Non-Admin Password Changes

Enables or disables the user to change the system and hard drive password
without the need for admin password.

Default: ON

Master Password Lockout

Enable Master Password Lockout

Enables or disables master password support.

Allow Non-Admin PSID Revert

Enable Allow Non-Admin PSID Revert

Enables or disables Physical Security ID (PSID) revert of NVMe storage drives
from the Dell Security Manager prompt.

Default: Disabled

NOTE:

When disabled, the PSID revert is protected by the BIOS Admin

password (if set), and the user will be prompted for the password before
the revert is performed

Table 13. System setup options—Update,Recovery menu

Update,Recovery

UEFI Capsule Firmware Updates

Enable UEFI Capsule Firmware Updates

Enables or disables BIOS updates through UEFI capsule update packages.

Default: ON

BIOS Recovery from Hard Drive

BIOS Recovery from Hard Drive

Enables the computer to recover from certain corrupted BIOS conditions from
a recovery file on the user primary hard drive or an external USB key.

Default: ON

NOTE:

BIOS Recovery from Hard Drive is not available for Self-encrypting

drives (SED).

BIOS Downgrade

Allow BIOS Downgrade

Controls flashing of the system firmware to previous revisions.

Default: ON

SupportAssist OS Recovery

SupportAssist OS Recovery

Enables or disables the boot flow for SupportAssist OS Recovery tool, in the
event of certain system errors.

Default: ON

BIOSConnect

System setup

Содержание Inspiron 3910












































































Результаты поиска

Содержание Inspiron 3910

Отзывы:

Dell Inspiron 3910, Руководство по обслуживанию, Страница: 65 / 75

Результаты поиска

Содержание Inspiron 3910

Отзывы: