Dell Inspiron 3700 Скачать руководство пользователя страница 8

Страница: 8 / 185

To install a second battery, perform the following steps:

1. Save your work and close all open files and application programs.

2. If the computer is docked, undock it.

3. If your system does not have Softex Docking Services or Softex BayManager, go to step 5.

4. If your system is running Microsoft Windows NT with Softex Docking Services installed or if your system is running Windows 98 with Softex

BayManager installed, perform the following steps.

a. Double-click the

Docking Services

BayManager

icon in the Windows system tray on the task bar. The

Softex

BayManager

window appears for or Windows 98. The

Docking Services

window appears for Windows NT.

b. Click the

Remove/Swap

button.

5. Preserve your data in one of these ways and then go to step 6:

Use the standby mode.

Place the computer in standby mode by pressing <Fn><Esc> (or <Scroll Lock><Esc> on an external keyboard if the

External Hot

Key

option is enabled in the System Setup program).

Use the S2D mode.

Place the computer in S2D mode by pressing <Fn><a> (or <Fn><q> on a French keyboard). When the green power indicator turns off,
continue to step 6.

6. Remove any device that may be installed in the media bay (see

Figure 2

Close the computer display and turn the computer over.

b. Slide the media bay latch toward the

Unlock

icon to release the device in the bay. Hold the latch in the unlock position while pulling the

device out of the bay.

c. Release the latch after you remove the device.

Figure 2. Removing a Device from the Media Bay

7. Slide the new battery firmly into the battery bay. You should hear a click when the battery is fully seated.

8. If your system is running Microsoft Windows NT with Softex Docking Services or Windows 98 with Softex BayManager, click

. Then click

to close the Softex window.

9. If you put the computer into standby or S2D mode, press the power button to resume normal operation.

Battery Charge Gauge

The battery charge gauge consists of five indicators. Each indicator represents 20 percent of full charge. If only one indicator lights up, recharge

electrical outlet or a second battery is installed.

NOTE: Softex BayManager and Docking Services do not report a second battery installed in the media bay on the

Storage

Devices

tab

Содержание Inspiron 3700


























































































































































































Результаты поиска

Содержание Inspiron 3700

Отзывы:

Бренды по названию

Популярные бренды

Dell Inspiron 3700, Справочное руководство

Результаты поиска

Содержание Inspiron 3700

Отзывы:

Бренды по названию

Популярные бренды