manualshive.com logo in svg

Dell Inspiron 3700, Справочное руководство

Поделиться
Скачать
Dell Inspiron 3700 Скачать руководство пользователя страница 55

 

When you attach a PS/2 mouse to the computer, the DualPoint™ integrated pointing device is automatically disabled. If you disconnect the mouse, 

you must shut down the computer or enter standby mode and then resume from it before the DualPoint integrated pointing device is operational. If 
you do not do this, the DualPoint integrated pointing device resumes operation in standard PS/2 mode, which means that many of the 
configuration features are disabled.

 

If you are using a PS/2-compatible mouse that is not made by Microsoft and the mouse does not work properly, reboot the computer. If the mouse 
still does not work, install the drivers from the diskette that came with the mouse and reboot the computer.

 

You can also connect an external mouse to the Inspiron 3700 APR.

 

Connecting an External Monitor

 

The computer's video connector is used to connect an external monitor to the computer. To attach an external monitor, perform the following steps.

 

1.

Make sure that the external monitor is turned off. Set the monitor on a monitor stand, desk top, or other level surface near your computer. 

2.

Connect the external monitor's video cable to the computer.

  

Plug the video cable connector into the matching video connector on the back of the computer, as shown in 

Figure 5

. If the video cable 

is not permanently attached to the monitor, connect it to the monitor also.

 

Figure 5. Connecting an External Monitor

 

 

Be sure to tighten all the screws on the video cable connector(s) to eliminate radio frequency interference (RFI).

 

3.

Connect your external monitor to a grounded electrical outlet.

  

Plug the three-prong connector on one end of the monitor's power cable into a grounded power strip or some other grounded power 
source. If the cable is not permanently attached to the monitor, connect it to the monitor also.

 

You can also connect an external monitor to the Inspiron 3700 APR.

 

Using an External Monitor

 

When an external monitor is connected to the computer, the video image automatically appears on the external monitor's screen when you boot 
your computer.

 

To toggle the video image between the display, an external monitor, or both simultaneously, press <Fn><F8> on the keyboard. Press <Scroll 
Lock><F8> on an external keyboard if the 

External Hot Key

 option is enabled in the System Setup program.

 

NOTE: If the computer is in standby mode or save-to-disk suspend mode when you attach an external mouse, the device is recognized 
immediately by the computer when it resumes normal operation.

 

However, programs that were already running may need to be 

restarted in order to recognize the mouse.

NOTICE: Do not place the monitor directly on top of your portable computer, even if it is closed. Doing so can crack the computer 

case, the display, or both.

NOTE:

 

If you are using the Microsoft

® 

Windows

® 

98 operating system, you can use an external monitor as an extension of 

your display. For more information, see the Windows 98 documentation or "

Dual-Display Mode

." 

Содержание Inspiron 3700


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды