manualshive.com logo in svg

Dell Inspiron 3700, Справочное руководство

Поделиться
Скачать
Dell Inspiron 3700 Скачать руководство пользователя страница 159

operation requires a diskette in the drive or 
a hard-disk drive in the bay before it can 
continue.

disk drive in the media bay.

Error reading PCMCIA 
card

The computer cannot identify the PC Card.

Reseat the card or try another PC Card that you know works. 

Extended memory size 
has changed

The amount of memory recorded in NVRAM 
does not match the memory installed in the 
computer.

Reboot the computer. If the error appears on the display 
again, call Dell for technical assistance. 

Gate A20 failure

An installed memory module may be loose.

Reseat the 

memory modules

 and, if necessary, replace them.

General failure

The operating system is unable to carry out 
the command.

This message is usually followed by specific information

—

for 

example,

 Printer out of paper

.

  Respond by taking 

the appropriate action.

Hard-disk drive 
configuration error

The computer cannot identify the drive type.

Turn off the computer, remove the drive, and boot the 
computer from a bootable diskette. Then turn off the 
computer, reinstall the drive, and reboot the computer. Run 
the 

IDE Devices 

tests in the Dell Diagnostics.

Hard-disk drive 
controller failure 0

The hard-disk drive does not respond to 
commands from the computer.

Turn off the computer, remove the drive, and boot the 
computer from a bootable diskette. Then turn off the 
computer again, reinstall the drive, and reboot the computer. 
If the problem persists, try another drive. Then run the 

IDE 

Devices

 tests in the Dell Diagostics.

Hard-disk drive failure

The hard-disk drive does not respond to 
commands from the computer.

Turn off the computer, remove the drive, and boot the 
computer from a bootable diskette. Then turn off the 
computer again, reinstall the drive, and reboot the computer. 
If the problem persists, try another drive. Then run the 

IDE 

Devices

 tests in the Dell Diagnostics 

Hard-disk drive read 
failure

The hard-disk drive may be faulty.

Turn off the computer, remove the drive, and boot the 
computer from a bootable diskette. Then turn off the 
computer again, reinstall the drive, and reboot the computer. 
If the problem persists, try another drive. Then run the 

IDE 

Devices

 tests in the Dell Diagnostics 

Invalid configuration 
information-please run 
System Setup Program

The system configuration information does 
not match the hardware configuration. This 
message is most likely to occur after a 
memory module is installed.

Correct the appropriate options in the 

System Setup

 

program. 

Keyboard clock line 
failure

A cable or connector may be loose, or the 
keyboard may be faulty.

Run the 

PC-AT Compatible Keyboards 

test in the Dell 

Diagnostics.

Keyboard controller 
failure

A cable or connector may be loose, or the 
keyboard may be faulty.

Reboot the computer, and avoid touching the keyboard or the 
mouse during the boot routine. If the problem persists, run the 

PC-AT Compatible Keyboards 

test in the Dell Diagnostics. 

Keyboard data line 
failure

A cable or connector may be loose, or the 
keyboard may be faulty.

Run the 

PC-AT Compatible Keyboards 

test in the Dell 

Diagnostics. 

Keyboard stuck key 
failure

If an external keyboard or keypad is being 
used, a cable or connector may be loose or 
the keyboard may be faulty. If the integrated 
keyboard is being used, the keyboard may 
be faulty. 
A key on the integrated keyboard or external 
keyboard may have been pressed while the 
computer was booting.

Run the 

PC-AT Compatible Keyboards 

test in the Dell 

Diagnostics. 

Memory address line 
failure at address, 
read value expecting 
value

An installed memory module may be faulty 
or improperly seated.

Reseat the 

memory modules

 and, if necessary, replace them.

Memory allocation error

The software you are attempting to run is 
conflicting with the operating system, 
another application program, or a utility.

Turn off the computer, wait 30 seconds, and then restart it. 
Try to run the program again. If the problem persists, contact 
the software company.

Memory data line 
failure at address, 
read value expecting 
value

An installed memory module may be faulty 
or improperly seated.

Reseat the 

memory modules

 and, if necessary, replace them.

Memory double word 
logic failure at 
address, read value 
expecting value

An installed memory module may be faulty 
or improperly seated.

Reseat the 

memory modules

 and, if necessary, replace them.

Содержание Inspiron 3700


























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды