Dell Inspiron 24 3000 series, Руководство по обслуживанию

Страница: 77 / 79

Replacing the rubber feet
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer . After working inside your
computer, follow the instructions in After working inside your
computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1 Align the screw holes on the rubber feet with the screw holes on the
display bezel.
2 Replace the screws that secure the rubber feet to the display bezel.
Post-requisites
1 Replace the display assembly .
2 Replace the control-buttons board .
3 Replace the speakers .
4 Replace the speaker cover .
5 Replace the VESA-mount bracket .
6 Replace the system board .
7 Replace the camera .
8 Replace the microphone .
9 Replace the coin-cell battery .
10 Replace the fan .
11 Replace the heat sink .
12 Replace the wireless card .
13 Replace the memory module .
14 Replace the hard drive .
77