Dell Inspiron 22 3263 Скачать руководство пользователя страница 72

Страница: 72 / 91

Technology and components

NOTE:

The screen shots of the device manager in your computer may vary depending on the configuration ordered.

Topics:

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

•

Audio

This computer is shipped with Realtek ALC3661 with Waves MaxxAudio Pro, which is the utility to adjust various audio settings.

NOTE:

The audio drivers are already installed when you receive your computer.

Downloading the audio driver

1. Turn on your computer.
2. Go to

www.dell.com/support

3. Click

Product support

, enter the Service Tag of your computer, and then click

Submit

NOTE:

If you do not have the Service Tag, use the auto-detect feature or manually browse for your computer model.

4. Click

Drivers & downloads

Find it myself

5. Scroll down the page and expand

Audio

6. Click

Download

to download the audio driver.

7. Save the file, and after the download is complete, navigate to the folder where you saved the audio driver file.
8. Double-click the audio driver file icon and follow the instructions on the screen to install the driver.

Identifying the audio controller

1. On the taskbar, click the search box, and then type

Device Manager.

2. Click

Device Manager

The

Device Manager

window is displayed.

Technology and components

Содержание Inspiron 22 3263




























































































Результаты поиска

Содержание Inspiron 22 3263

Отзывы:

Dell Inspiron 22 3263, Руководство по обслуживанию, Страница: 72 / 91

Результаты поиска

Содержание Inspiron 22 3263

Отзывы: