manualshive.com logo in svg

Dell Inspiron 22 3263, Руководство по обслуживанию, Страница: 51 / 91

Поделиться
Скачать
Dell Inspiron 22 3263 Скачать руководство пользователя страница 51

Removing the speakers

NOTE:

 Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

.

Topics:

•

Prerequisites

•

Procedure

Prerequisites

1. Remove the 

stand

.

2. Remove the 

back cover

.

3. Remove the 

system-board shield

.

Procedure

1. Disconnect the speaker cable from the system board.
2. Note the routing of the speaker cable and the position of the rubber grommets on the computer bezel.
3. Remove the speaker cable from the routing guides.
4. Remove the screw that secures the tape to the display-assembly base.
5. Peel off the tape that secures the speaker cable to the display-assembly base.
6. Lift the speakers, along with the speaker cable, off the display assembly.

1. speaker cable

2. routing guides

3. speakers (2)

4. screw

30

Removing the speakers

51

Содержание Inspiron 22 3263




























































































Отзывы:

Нет отзывов