manualshive.com logo in svg

Dell Inspiron 22 3263, Руководство по обслуживанию, Страница: 35 / 91

Поделиться
Скачать
Dell Inspiron 22 3263 Скачать руководство пользователя страница 35

Replacing the wireless card

NOTE:

 Before working inside your computer, read the safety information that shipped with your computer and follow

the steps in 

Before working inside your computer

. After working inside your computer, follow the instructions in 

After

working inside your computer

. For more safety best practices, see the Regulatory Compliance home page at

www.dell.com/regulatory_compliance

.

Topics:

•

Procedure

•

Post-requisites

Procedure

1. Align the notch on the wireless card with the tab on the wireless-card slot.
2. Insert the wireless card into the wireless-card slot.
3. Connect the antenna cables to the wireless card.

The following table provides the antenna-cable color scheme for the wireless card supported by your computer:

Connectors on the wireless card

Antenna-cable color

Main (white triangle)

White

Auxiliary (black triangle)

Black

4. Press down the other end of the wireless card and align the screw hole on the wireless-card bracket and wireless card with the screw

hole on the system board.

5. Replace the screw that secures the wireless-card bracket and the wireless card to the system board.

17

Replacing the wireless card

35

Содержание Inspiron 22 3263




























































































Отзывы:

Нет отзывов