Dell Inspiron 1501 Скачать руководство пользователя страница 40

Страница: 40 / 40

14.

Replace the memory module(s) (see

Replacing the Memory Module(s)

15.

Replace the optical drive (see

Replacing an Optical Drive

16.

Replace the hard drive (see

Replacing the Hard Drive

17.

Replace the main battery (see

Before Working Inside Your Computer

18.

Turn the computer over and turn it on.

19.

Insert the flash BIOS update program CD that accompanied the replacement system board into the optical drive. Follow the instructions that appear on
the screen. See

Flashing the BIOS

for further information.

20.

Enter the system setup program to update the BIOS on the new system board with the computer Service Tag.

Back to Contents Page

NOTICE:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may result in

damage to the computer.

NOTE:

If you use a BIOS update program CD to flash the BIOS, press <F12> before inserting the CD so that you can set up the computer to boot from a

CD this one time only. Otherwise, you must enter the system setup program to change the default boot order.

Содержание Inspiron 1501









































Результаты поиска

Содержание Inspiron 1501

Отзывы:

Похожие инструкции для Inspiron 1501

Бренды по названию

Популярные бренды

Dell Inspiron 1501, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1501

Отзывы:

Похожие инструкции для Inspiron 1501

Бренды по названию

Популярные бренды