Dell Inspiron 1501 Скачать руководство пользователя страница 7

Страница: 7 / 40

Great user manuals database on

UserManuals.info

Back to Contents Page

ExpressCard/Hard-Drive Bay Assembly

Dell™ Inspiron™ 1501 Service Manual

Removing the ExpressCard/Hard-Drive Bay Assembly

Replacing the ExpressCard/Hard-Drive Bay Assembly

Removing the ExpressCard/Hard-Drive Bay Assembly

Follow the instructions in

Before You Begin

Remove the hard drive (see

Removing the Hard Drive

Remove the optical drive (see

Removing an Optical Drive

Remove the hinge cover (see

Removing the Hinge Cover

Remove the keyboard (see

Removing the Keyboard

Remove the display assembly (see

Removing the Display Assembly

Remove the palm rest (see

Removing the Palm Rest

Remove the six M2.5x 5-mm screws from the ExpressCard/hard-drive bay assembly.

Remove the assembly from the system board.

Replacing the ExpressCard/Hard-Drive Bay Assembly

At a 45-degree angle, insert the end of the ExpressCard/hard-drive bay assembly into its access hole on the side of the computer base.

Lower the assembly aligning the screw holes on the assembly with the holes on the system board.

Replace the six M2.5x 5-mm screws from the assembly.

CAUTION:

Before you begin the following procedure, follow the safety instructions in the

Product Information Guide

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such

as the back panel) on the computer.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your Computer

) before working inside the

computer.

M2.5 x 5-mm screws (6)

ExpressCard/hard-drive bay assembly

Содержание Inspiron 1501









































Результаты поиска

Содержание Inspiron 1501

Отзывы:

Похожие инструкции для Inspiron 1501

Бренды по названию

Популярные бренды

Dell Inspiron 1501, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1501

Отзывы:

Похожие инструкции для Inspiron 1501

Бренды по названию

Популярные бренды