Dell Inspiron 1501 Скачать руководство пользователя страница 39

Страница: 39 / 40

Great user manuals database on

UserManuals.info

16.

Remove the remaining two M2.5 x 5-mm screws from the system board.

17.

Pull out slightly on the back right side of the computer to release the connectors on the system board from the base.

18.

Lift the front of the system board and slowly ease the connectors out of the computer base and remove the system board.

Replacing the System Board

Carefully place the system board into the computer base.

Replace the two M2.5 x 5-mm screws in the system board.

Replace the two hex-nut video screws in the back of the computer.

Replace the ExpressCard/hard-drive bay assembly (see

Replacing the ExpressCard/Hard-Drive Bay Assembly

Replace the processor (see

Replacing the Processor Module

Replace the processor thermal-cooling assembly (see

Replacing the Processor Thermal-Cooling Assembly

Replace the fan (see

Replacing a Fan

Replace the palm rest (see

Replacing the Palm Rest

Replace the display assembly (see

Replacing the Display Assembly

10.

Replace the Mini-Card (see

Replacing a Mini-Card

11.

Replace the keyboard (see

Replacing the Keyboard

12.

Replace the hinge cover (see

Replacing the Hinge Cover

13.

Replace the modem (see

Replacing the Modem

M2.5 x 5-mm screws (2)

Содержание Inspiron 1501









































Результаты поиска

Содержание Inspiron 1501

Отзывы:

Похожие инструкции для Inspiron 1501

Бренды по названию

Популярные бренды

Dell Inspiron 1501, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 1501

Отзывы:

Похожие инструкции для Inspiron 1501

Бренды по названию

Популярные бренды