Dell Inspiron 14z N411z Скачать руководство пользователя страница 97

Страница: 97 / 102

System Setup Utility

•

Network

— The computer attempts to boot from the network. If no

operating system is found on the network, the computer generates an error

message.

Changing Boot Sequence for the Current Boot

You can use this feature to change the current boot sequence, for example, to

boot from the CD/DVD/CD-RW drive to run Dell Diagnostics from the

Drivers and Utilities

disc. On completion of diagnostic tests, the previous

boot sequence is restored.

If you are booting from a USB device, connect the USB device to a USB

connector.

Turn on (or restart) your computer.

When

F2 Setup, F12 Boot Options

appears in the lower-right

corner of the screen, press <F12>.

NOTE:

If you wait too long and the operating system logo appears, continue to

wait until you see the Microsoft Windows desktop. Then shut down your

computer and try again.

The

Boot Device Menu

appears, listing all available boot devices.

On the

Boot Device Menu

choose the device you want to boot from.

For example, if you are booting to a USB memory key, highlight

USB

Storage Device

and press <Enter>.

NOTE:

To boot to a USB device, the device must be bootable. To ensure your

device is bootable, check the device documentation.

Changing Boot Sequence for Future Boots

Enter system setup. See "Entering System Setup" on page 91.

Use the arrow keys to highlight the

Boot

menu option and press <Enter>

to access the menu.

NOTE:

Write down your current boot sequence in case you want to restore it.

Press the up- and down-arrow keys to move through the list of devices.

Press plus (+) or minus (–) to change the boot priority of the device.

Содержание Inspiron 14z N411z







































































































Результаты поиска

Содержание Inspiron 14z N411z

Отзывы:

Похожие инструкции для Inspiron 14z N411z

Бренды по названию

Популярные бренды

Dell Inspiron 14z N411z, Руководство пользователя

Результаты поиска

Содержание Inspiron 14z N411z

Отзывы:

Похожие инструкции для Inspiron 14z N411z

Бренды по названию

Популярные бренды