manualshive.com logo in svg

Dell Inspiron 14, Руководство пользователя

Поделиться
Скачать
Dell Inspiron 14 Скачать руководство пользователя страница 61

Removing the System Board

WARNING: Before working inside your computer, read the safety 
information that shipped with your computer and follow the steps in 

Before Working Inside Your Computer

. After working inside your 

computer, follow the instructions in 

After Working Inside Your 

Computer

. For more safety best practices, see the Regulatory 

Compliance home page at dell.com/regulatory_compliance. 

NOTE: Your computer’s Service Tag is stored in the system board. You 
must enter the Service Tag in the system setup after you replace the 

system board.

NOTE: Replacing the system board removes any changes you have 

made to the BIOS using System Setup. You must make the desired 

changes again after you replace the system board.

NOTE: Before disconnecting the cables from the system board, note the 

location of the connectors so that you can reconnect them correctly 

after you replace the system board.

Prerequisites

1 

Remove the 

battery

.

2 

Remove the 

optical drive

.

3 

Remove the 

base cover

.

4 

Remove the 

memory module(s)

.

5 

Remove the 

wireless card

.

6 

Remove the 

hard drive

.

7 

Remove the 

keyboard

.

8 

Remove the 

palm rest

.

Procedure

1 

Peel the tape that secures the display cable to the connector on the 

system board.

2 

Lift the latch and, using the pull-tab, disconnect the display cable from 

the connector on the system board.

3 

Peel the display cable from the fan.

4 

Lift the latch and, using the pull-tab, disconnect the I/O-board cable 

from the connector on the system board.

61

Содержание Inspiron 14





















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды