Removing the battery
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your computer
. After working inside your
computer, follow the instructions in
After working inside your
computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Close the display and turn the computer over.
2
Slide the battery-release latch to the unlock position.
3
Lift the battery at an angle and remove the battery from the battery bay.
1
battery
2
battery-release latch
4
Turn the computer over, open the display, and press the power button
for five seconds to ground the system board.
14
Содержание Inspiron 14 5458
