Dell Inspiron 14 5415 Скачать руководство пользователя

Страница: 72 / 77

Updating from the One-Time boot menu

To update your BIOS from the F12 One-Time boot menu, you need the following:

●

USB drive formatted to the FAT32 file system (key does not have to be bootable)

●

BIOS executable file that you downloaded from the Dell Support website and copied to the root of the USB drive

●

AC power adapter that is connected to the computer

●

Functional computer battery to flash the BIOS

Perform the following steps to perform the BIOS update flash process from the F12 menu:

CAUTION:

Do not turn off the computer during the BIOS update process. The computer may not boot if you turn

off your computer.

Steps

1. From a turn off state, insert the USB drive where you copied the flash into a USB port of the computer.
2. Turn on the computer and press F12 to access the One-Time Boot Menu, select BIOS Update using the mouse or arrow keys

then press Enter.
The flash BIOS menu is displayed.

3. Click

Flash from file

4. Select external USB device.
5. Select the file and double-click the flash target file, and then click

Submit

6. Click

Update BIOS

. The computer restarts to flash the BIOS.

7. The computer will restart after the BIOS update is completed.

System setup

Содержание Inspiron 14 5415














































































Результаты поиска

Содержание Inspiron 14 5415

Отзывы:

Похожие инструкции для Inspiron 14 5415

Бренды по названию

Популярные бренды

Dell Inspiron 14 5415, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 14 5415

Отзывы:

Похожие инструкции для Inspiron 14 5415

Бренды по названию

Популярные бренды