Dell Inspiron 14 5415 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 77

Dell Inspiron 14 5415 Скачать руководство пользователя страница 55

Steps

1. Remove the two screws (M2.5x4) that secure the right-display hinge to the system board.
2. Pry open the right-display hinge at an angle of 90 degrees.
3. Peel the tape that covers the power-adapter port cable-connector on the system board.
4. Disconnect the power-adapter port cable from the system board.
5. Peel the tape that secures the display-cable connector latch to the system board.
6. Lift the latch and disconnect the display-cable from the connector on the system board.
7. Disconnect the fan cable from the system board.
8. Lift the I/O-board cable-connector latch and disconnect the I/O-board cable from the system board.
9. Disconnect the speaker cable from the system board.
10. Lift the latch and disconnect the touchpad cable from the system board.
11. Lift the latch and disconnect the keyboard cable from the system board.
12. Lift the latch and disconnect the keyboard-backlight cable from the system board.

NOTE:

This step is only applicable for computers installed with a backlit keyboard.

13. Remove the two screws (M2x4) that secure the Type-C port-bracket to the system board.
14. Lift the Type-C port-bracket off the system board.
15. Remove the two screws (M2x2) that secure the system board to the palm-rest and keyboard assembly.
16. Lift the system board from the palm-rest and keyboard assembly.

Installing the system board

Prerequisites

If you are replacing a component, remove the existing component before performing the installation process.

About this task

The following image indicates the connectors on your system board.

Removing and installing components

55

«
...
53
54
55
56
57
...
»

Содержание Inspiron 14 5415














































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды