background image

WARNING: Disconnect all power sources before opening the 
computer cover or panels. After you finish working inside the 
computer, replace all covers, panels, and screws before connecting to 
the power source.

CAUTION: To avoid damaging the computer, make sure that the work 
surface is flat and clean.

CAUTION: To avoid damaging the components and cards, handle 
them by their edges and avoid touching pins and contacts.

CAUTION: Only a certified service technician is authorized to remove 
the computer cover and access any of the components inside the 
computer. See the safety instructions for complete information about 
safety precautions, working inside your computer, and protecting 
against electrostatic discharge.

CAUTION: Before touching anything inside your computer, ground 
yourself by touching an unpainted metal surface, such as the metal at 
the back of the computer. While you work, periodically touch an 
unpainted metal surface to dissipate static electricity, which could 
harm internal components.

CAUTION: When you disconnect a cable, pull on its connector or on 
its pull-tab, not on the cable itself. Some cables have connectors with 
locking tabs or thumb-screws that you must disengage before 
disconnecting the cable. When disconnecting cables, keep them 
evenly aligned to avoid bending any connector pins. When connecting 
cables, make sure that the ports and connectors are correctly oriented 
and aligned.

CAUTION: To disconnect a network cable, first unplug the cable from 
your computer and then unplug the cable from the network device.

CAUTION: Press and eject any installed card from the media-card 
reader.

Recommended Tools

The procedures in this document may require the following tools:

• Philips screwdriver
• Plastic scribe

9

Содержание Inspiron 14 5000 Series











































































Отзывы: