Replacing the Status-Light
Board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
. After working inside your
computer, follow the instructions in
After Working Inside Your
Computer
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Align the screw hole on the status-light board with the screw hole on the
palm rest.
2
Replace the screw that secures the status-light board to the palm rest.
3
Using the alignment posts, place the left speaker on the palm rest.
4
Adhere the status-light board cable to the palm rest and slide the cable
through the slot on the palm rest.
5
Turn the computer over and open the display.
6
Slide the status-light board cable in the connector and press down on
the latch to secure the cable.
Post-requisites
1
Replace the
I/O board
.
2
Replace the
base frame
.
3
Replace the
keyboard
.
4
Replace the
fan
.
5
Replace the
hard drive
.
6
Replace the
battery
.
7
Replace the
base cover
.
58
Содержание Inspiron 14 5000 Series
Страница 17: ...4 Lift the hard drive bracket off the hard drive 1 screws 4 2 hard drive bracket 3 hard drive 17 ...
Страница 28: ...8 Lift the fan off the palm rest 1 fan cable 2 screws 2 3 fan 28 ...
Страница 31: ...4 Turn the keyboard over and place it on the palm rest 1 plastic scribe 2 keyboard 3 tabs 31 ...
Страница 35: ...1 keyboard cable 2 keyboard backlight cable 3 fold line 35 ...