Dell Inspiron 13 N3010 страница 14 Скачать руководство пользователя

Страница: 14 / 48

Back to Contents Page

Processor Heat Sink Fan

Dell™ Inspiron™ N3010 Service Manual

Removing the Processor Heat Sink Fan

Replacing the Processor Heat Sink Fan

Removing the Processor Heat Sink Fan

Follow the instructions in

Before You Begin

Remove the battery (see

Removing the Battery

Remove the memory-module cover (see

Removing the Memory-Module Cover

Remove the memory module(s) (see

Removing the Memory Module(s)

Remove the keyboard (see

Removing the Keyboard

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Lift the connector latch and pull the pull-tab to disconnect the VGA connector cable from the connector on the system board.

Disconnect the processor heat sink fan cable from the connector on the system board.

Remove the screw that secures the processor heat sink fan to the computer base.

10.

Lift the processor heat sink fan off the computer base.

Replacing the Processor Heat Sink Fan

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

WARNING:

If you remove the processor heat sink from the computer when the heat sink is hot, do not touch the metal housing of the heat sink.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

1 screw

2 processor heat sink fan

3 processor heat sink fan cable

4 VGA connector cable

Содержание Inspiron 13 N3010

















































Результаты поиска

Содержание Inspiron 13 N3010

Отзывы:

Похожие инструкции для Inspiron 13 N3010

Бренды по названию

Популярные бренды

Dell Inspiron 13 N3010, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 13 N3010

Отзывы:

Похожие инструкции для Inspiron 13 N3010

Бренды по названию

Популярные бренды