Dell Inspiron 13 N3010 страница 35 Скачать руководство пользователя

Страница: 35 / 48

Replacing the Mini-Card

Follow the instructions in

Before You Begin

Remove the new Mini-Card from its packaging.

Insert the Mini-Card connector at a 45-degree angle into the connector on the system board.

Press the other end of the Mini-Card down into the slot on the system board and replace the screw that secures the Mini-Card to the system board.

Turn the system board over.

Follow the instructions from

step 7

step 21

Replacing the System Board

Connect the appropriate antenna cables to the Mini-Card you are installing. The following table provides the antenna cable color scheme for the Mini-
Card supported by your computer.

Install the drivers and utilities for your computer, as required.

Back to Contents Page

CAUTION:

When the Mini-Card is not in the computer, store it in protective antistatic packaging. For more information, see "Protecting Against

Electrostatic Discharge" in the safety information that shipped with your computer.

CAUTION:

Use firm and even pressure to slide the card into place. If you use excessive force, you may damage the connector.

CAUTION:

The connectors are keyed to ensure correct insertion. If you feel resistance, check the connectors on the card and on the system

board, and realign the card.

Connectors on the Mini-Card Antenna Cable Color Scheme

WLAN (2 antenna cables)

Main WLAN (white triangle)

Auxiliary WLAN (black triangle)

white

black

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

NOTE:

If you are installing a communication card from a source other than Dell, you must install the appropriate drivers and utilities.

Содержание Inspiron 13 N3010

















































Результаты поиска

Содержание Inspiron 13 N3010

Отзывы:

Похожие инструкции для Inspiron 13 N3010

Бренды по названию

Популярные бренды

Dell Inspiron 13 N3010, Руководство по обслуживанию

Результаты поиска

Содержание Inspiron 13 N3010

Отзывы:

Похожие инструкции для Inspiron 13 N3010

Бренды по названию

Популярные бренды