Dell G5 5000 Скачать руководство пользователя страница 56

Страница: 56 / 64

Table 8. System setup options—Secure Boot menu (continued)

Secure Boot

Secure Boot Mode

Modifies the behavior of Secure Boot to allow evaluation or enforcement of UEFI
driver signatures.

•

Deployed Mode-Default: Enabled

•

Audit Mode-Default: Disabled

Deployed Mode

Enable or disable the deployed mode.

Audit Mode

Enable or disable the audit mode.

Expert Key Management

Expert Key Management

Enable or disable Expert Key Management.

Custom Mode Key Management

Select the custom values for expert key management.

Table 9. System setup options—Intel Software Guard Extensions menu

Intel Software Guard Extensions

Intel SGX Enable

Enable or disable Intel Software Guard Extensions.

Enclave Memory Size

Set the Intel Software Guard Extensions Enclave Reserve Memory Size.

Performance

Multi Core Support

Enable multiple cores.

Default: Enabled.

Intel SpeedStep

Enable or disable Intel Speedstep Technology.

Default: Enabled.

NOTE:

If enabled, the processor clock speed and core voltage are

adjusted dynamically based on the processor load.

C-States Control

Enable or disable additional processor sleep states.

Default: Enabled.

Intel TurboBoost

Enable or disable Intel TurboBoost mode of the processor.

Default: Enabled.

HyperThread control

Enable or disable HyperThreading in the processor.

Default: Enabled.

Power Management

AC Recovery

Sets what action the computer takes when power is restored.

Enable Intel Speed Shift Technology

Enable or disable Intel Speed Shift Technology.

Auto On Time

Enable to set the computer to turn on automatically every day or on a preselected
date and time. This option can be configured only if the Auto On Time is set to
Everyday, Weekdays or Selected Days.

Default: Disabled.

Deep Sleep Control

Deep Sleep Control enables you to control the Deep Sleep mode support.

USB Wake Support

USB Wake Support enables the USB devices to wake the computer from Standby.

Fan Control Override

Enable or disable Fan control Override.

Wake on LAN/WLAN

Enables the computer to be powered on by special LAN signals.

Block sleep

Enables you to block entering to sleep mode in OS environment.

POST Behavior

System setup

Содержание G5 5000

































































Результаты поиска

Содержание G5 5000

Отзывы:

Похожие инструкции для G5 5000

Бренды по названию

Популярные бренды

Dell G5 5000, Руководство по обслуживанию

Результаты поиска

Содержание G5 5000

Отзывы:

Похожие инструкции для G5 5000

Бренды по названию

Популярные бренды