Dell G5 5000 Скачать руководство пользователя страница 32

Страница: 32 / 64

Steps

1. Slide the power-button module into the chassis until it snaps into place.
2. Connect the power-button cable to the system board.

Next steps

1. Install the

3.5-inch hard drive

2. Install the

left-side cover

3. Follow the procedure in

After working inside your computer

Processor fan and heat-sink assembly

Removing the processor fan and heat-sink assembly

Prerequisites

1. Follow the procedure in

Before working inside your computer

NOTE:

The heat sink may become hot during normal operation. Allow sufficient time for the heat sink to cool before

you touch it.

CAUTION:

For maximum cooling of the processor, do not touch the heat transfer areas on the heat sink. The oils in

your skin can reduce the heat transfer capability of the thermal grease.

2. Remove the

left-side cover

About this task

The following images indicate the location of the processor fan and heat-sink assembly and provides a visual representation of the removal
procedure.

The processor fan and heat-sink assembly on your computer may differ based on the configuration ordered.

Removing and installing components

Содержание G5 5000

































































Результаты поиска

Содержание G5 5000

Отзывы:

Похожие инструкции для G5 5000

Бренды по названию

Популярные бренды

Dell G5 5000, Руководство по обслуживанию

Результаты поиска

Содержание G5 5000

Отзывы:

Похожие инструкции для G5 5000

Бренды по названию

Популярные бренды