manualshive.com logo in svg

Dell External OEMR 1435, Руководство пользователя

Поделиться
Скачать
Dell External OEMR 1435 Скачать руководство пользователя страница 10

10

Introduction

Additionally, the BMC can be accessed by standard, off-the-shelf terminal or 
terminal emulator utilities that allow access to sensor status information and 
power control.

What’s New in BMC Management Utility 3.0

The BMC Management Utility (BMU) 3.0 has the following new features:

•

IPMItool command line interface available for Dell 

x

8

xx

, 

x

9

xx

, and 

xx

0

x

 

systems running supported Microsoft

®

 Windows

®

 and Linux systems.

•

New commands to manage the LCD display in 

x

9

xx

 and 

xx

0

x

 systems.

•

New commands to monitor your system’s power.

•

Added support for Windows Server

®

 2008 (includes Standard, Enterprise, 

and Web editions.)

 

NOTE: 

Microsoft Windows Server 2008 is scheduled to be available in the first half 

of 2008. For latest information, see 
http://www.microsoft.com/windowsserver2008/default.mspx.

Supported Systems

The BMC management features documented in this guide are supported on 
the following Dell systems:

•

800

•

830

•

840

•

850

•

860

•

SC1425

•

SC1435

•

1800

•

1850

•

1855

•

1900

•

1950

Содержание External OEMR 1435





























































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды