Dell EMC VxFlex Ready Node 14G Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 76

background image

The iSM is available as a Zip file for installing on systems running the VMware ESXi
operating system. You can install the iSM via SSH or using the vSphere CLI.

The file for the currently supported ESXi versions is:

l

ISM-Dell-Web-3.1.0-960.VIB-ESX6i-Live_A00.zip

Install the iSM using SSH

Install the iDRAC Service Module (iSM) software on the ESXi host via SSH.

Procedure

1. Download the

ISM-Dell-Web-3.1.0-960.VIB-ESX6i-Live_A00.zip

file

http://www.dell.com/support/home/us/en/19/drivers/driversdetails?

2. Unzip the file to a local directory on the system.
3. Upload the VIB to the ESXi host's datastore.
4. Log in to the vCenter via the vSphere Web Client.

5. For each guest operating system, select the guest OS, and from the Actions

>

Power menu, select Shut Down Guest OS.

6. When all the guest operating systems are powered off, right-click the ESXi host

and select Enter Maintenance Mode.

7. Establish an SSH connection to the ESXi host and log in using the root

username and password.

8. Install the iSM software:

esxcli software vib install - d /vmfs/volumes/datastore/

<iDRAC Service Module file>

The command output tells you whether the installation succeeded.

9. Right-click the ESXi host and select Power

>

Reboot.

10. From the iDRAC web interface, open the iDRAC settings

>

Overview page and

ensure that the iDRAC Service Module status is Running

Install the iSM using the vSphere CLI

Install the iDRAC Service Module (iSM) software on the ESXi host using the vSphere
CLI.

Procedure

1. Download the

ISM-Dell-Web-3.1.0-960.VIB-ESX6i-Live_A00.zip

file

http://www.dell.com/support/home/us/en/19/drivers/driversdetails?

2. Unzip the file to a local directory on the system.
3. Log in to the vCenter via the vSphere Web Client.
4. For each guest operating system, select the guest OS, and from the Actions

>

Power menu, select Shut Down Guest OS.

5. When all the guest operating systems are powered off, right-click the ESXi host

and select Enter Maintenance Mode.

6. If you are using the vSphere CLI from a Windows server, navigate to the

directory where you have installed the vSphere CLI utilities.

Additional Configurations

Install the iSM using SSH

65

«
...
63
64
65
66
67
...
»

Содержание EMC VxFlex Ready Node 14G













































































Отзывы:

Нет отзывов

Похожие инструкции для EMC VxFlex Ready Node 14G

Бренд: Vxl Страницы: 19

Бренд: ioCorp Страницы: 18

Ultra Enterprise 3000

Бренд: Sun Microsystems Страницы: 48

Бренд: Waves Страницы: 6

Connectware PortServer TS 8/16

Бренд: Digi Страницы: 106

301P - DP Print Server

Бренд: D-Link Страницы: 150

Бренд: QNAP Страницы: 55

Бренд: Vitek Страницы: 55

DIRECTORY SERVER 7.1 SP7 - S

Бренд: Red Hat Страницы: 12

Бренд: Obvius Страницы: 39

Com Port Redirector

Бренд: Lantronix Страницы: 31

TimeProvider 5000

Бренд: Symmetricom Страницы: 534

Бренд: VBrick Systems Страницы: 44

AS2021M-UR Plus

Бренд: Supero Страницы: 104

Бренд: Supero Страницы: 104

AS-1041M-T2 Plus

Бренд: Supero Страницы: 98

Бренд: Supero Страницы: 135

Бренд: Supero Страницы: 140

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды