Dell EMC PowerProtect DD6400 System Скачать руководство пользователя | Manualshive

Страница: 7 / 46

background image

Introduction and Preparation

Topics:

•

Upgrade Requirement for Data Domain OS Version 7.7.0 on DD6400 Units

•

Document purpose

•

Installation checklist

•

DD6400 system features

•

Product serial number tag (PSNT)

•

Required tools and supplies

•

Safety considerations

Upgrade Requirement for Data Domain OS Version
7.7.0 on DD6400 Units

Data Domain 6400 systems come pre-installed with the latest version of the Data Domain OS software that was available from
the factory at the time of shipment. As a standard practice, Dell Technologies requires that customers with new installations
download the latest available code version at the time of install.

Data Domain OS version 7.7.0 may be susceptible to an issue that could result in an impact to data availability. Data Domain OS
version 7.7.1 contains a fix that addresses this issue.

Required Action

Upon installation of the Data Domain 6400 system, you are

required

to

immediately

perform a pre-upgrade health check, and

upgrade to Data Domain OS version 7.7.1. This version may be downloaded from the

DD OS 7.7 Drivers & Downloads

section

on the Data Domain Product Support page

https://www.dell.com/support/home/en-us/product-support/product/dd-os-7.7/

For complete instructions on updating your Data Domain OS, refer to the Dell EMC Data Domain Software Upgrade in KB 21710
-

https://www.dell.com/support/kbdoc/000021710

.

If you do not take action at this time, please be advised that the system may encounter an
issue which could result in an impact to data availability. Dell is not responsible for any
data unavailability.

Further Assistance

As always, Dell Technologies continues to stand behind the warranty and service contracts applicable to your systems.

If you need further assistance or have any other questions, contact Dell Technologies technical support. Dell Technologies
provides several online and telephone-based support and services options. Availability varies by country and product, and some
services may not be available in your area.

To contact Dell Technologies technical support:

1. Go to

https://dell.com/support

.

2. Select the contact method that best suits your needs.
3. Reference Dell knowledgebase article KB195329 -

https://www.dell.com/support/kbdoc/000195329

for this issue.

1

Introduction and Preparation

7

«
...
5
6
7
8
9
...
»

Содержание EMC PowerProtect DD6400 System















































Отзывы:

Нет отзывов

Похожие инструкции для EMC PowerProtect DD6400 System

8BIG RACK THUNDERBOLT 2

Бренд: LaCie Страницы: 28

Бренд: IBM Страницы: 44

ProLiant DL580 Gen10

Бренд: HPE Страницы: 158

SUPERSERVER 6015C-M3

Бренд: Supero Страницы: 118

Бренд: CNET Страницы: 2

FusionServer G5500 V6

Бренд: xFusion Digital Technologies Страницы: 100

x3350 - System - 4192

Бренд: IBM Страницы: 98

x3500 - System - 7977

Бренд: IBM Страницы: 124

Бренд: IBM Страницы: 106

x3200 - System M3 - 7328

Бренд: IBM Страницы: 100

System x3400 Type 7975

Бренд: IBM Страницы: 124

System x3300 M4

Бренд: IBM Страницы: 470

System x iDataPlex dx360

Бренд: IBM Страницы: 26

TS-h 90FU Series

Бренд: QNAP Страницы: 75

Superserver 5038ML-H24TRF

Бренд: Super Страницы: 108

Бренд: OSD Audio Страницы: 4

Бренд: Cooper Bussmann Страницы: 94

72335LU - System x3850 M2

Бренд: IBM Страницы: 96

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды