6. Restart your system.
Initializing the TPM 2.0 for users
Steps
1. While booting your system, press F2 to enter System Setup.
2. On the
System Setup Main Menu
screen, click
System BIOS
>
System Security Settings
.
3. From the
TPM Security
option, select
On
.
4. Save the settings.
5. Restart your system.
LOM and rear IO card
Removing the rear Input Output card and LOM card
Prerequisites
1. Follow the safety guidelines listed in the
.
2. Follow the procedure listed in
Before working inside your system
3.
Steps
1. Using a Phillips #2 screwdriver, remove the screws that secure the rear Input Output (RIO) card and LOM card to the
system board.
2. Holding the edges, pull the RIO card and LOM card to disconnect from the connector on the system board.
NOTE:
The procedure to remove RIO on liquid cooling configuration is same.
Figure 131. Removing the RIO card
Installing and removing system components
145
