Cabling Your Cluster Hardware
31
Cabling a SAN-Attached Cluster to a Dell|EMC CX3-10c, CX3-20/c, or CX3-40/c
Storage System
1
Connect cluster node 1 to the SAN:
a
Connect a cable from HBA port 0 to Fibre Channel switch 0 (sw0).
b
Connect a cable from HBA port 1 to Fibre Channel switch 1 (sw1).
2
Repeat step 1 for each cluster node.
3
Connect the storage system to the SAN:
a
Connect a cable from Fibre Channel switch 0 (sw0) to SP-A
Fibre
port 0 (first Fibre Channel port
).
b
Connect a cable from Fibre Channel switch 0 (sw0) to SP-B
Fibre
port 1 (second Fibre Channel port
).
c
Connect a cable from Fibre Channel switch 1 (sw1) to SP-A
Fibre
port 1 (second Fibre Channel port
).
d
Connect a cable from Fibre Channel switch 1 (sw1) to SP-B
Fibre
port 0 (first Fibre Channel port
).
Figure 2-10.
Cabling a SAN-Attached Cluster to the Dell|EMC CX3-20 SPE
sw0
sw1
cluster node 2
cluster node 1
CX3-20 storage system
0 1
0 1
HBA ports (2)
HBA ports (2)
SP-A
SP-B
Содержание EMC CX3 Series
Страница 5: ...Contents 5 A Troubleshooting 57 B Cluster Data Form 63 C Zoning Configuration Form 65 ...
Страница 6: ...6 Contents ...
Страница 16: ...16 Introduction ...
Страница 66: ...66 Zoning Configuration Form ...
