26
Cabling Your Cluster Hardware
3
Connect cluster node 3 to the storage system:
a
Install a cable from cluster node 3 HBA port 0 to SP-A
Fibre port 2
(third Fibre Channel port
).
b
Install a cable from cluster node 3 HBA port 1 to SP-B
Fibre port 2
(third Fibre Channel port
).
4
Connect cluster node 4 to the storage system:
a
Install a cable from cluster node 4 HBA port 0 to SP-A
Fibre port 3
(fourth Fibre Channel port
).
b
Install a cable from cluster node 4 HBA port 1 to SP-B
Fibre port 3
(fourth Fibre Channel port
).
Cabling Two Clusters to a Dell|EMC Storage System
The four fibre channel ports per storage processor on Dell|EMC CX3-40f and
CX3-80 storage systems allows you to connect two two-node clusters in a
direct-attached configuration. Similarly, the six fibre-channel ports per
processor on Dell|EMC CX3-20f storage system allows you to connect three
two-node clusters in a direct-attached environment.
NOTE:
EMC
®
Access Logix™ is required if the CX-series storage system is
connected to more than one cluster in a direct-attached configuration.
Cabling Two Two-Node Clusters to a CX3-20f, CX3-40f, or CX3-80 Storage System
1
In the first cluster, connect cluster node 1 to the storage system:
a
Install a cable from cluster node 1 HBA port 0 to SP-A
Fibre port 0
(first Fibre Channel port
).
b
Install a cable from cluster node 1 HBA port 1 to SP-B
Fibre port 0
(first Fibre Channel port
).
2
In the first cluster, connect cluster node 2 to the storage system:
a
Install a cable from cluster node 2 HBA port 0 to SP-A
Fibre port 1
(second Fibre Channel port
).
b
Install a cable from cluster node 2 HBA port 1 to SP-B
Fibre port 1
(second Fibre Channel port
).
Содержание EMC CX3 Series
Страница 5: ...Contents 5 A Troubleshooting 57 B Cluster Data Form 63 C Zoning Configuration Form 65 ...
Страница 6: ...6 Contents ...
Страница 16: ...16 Introduction ...
Страница 66: ...66 Zoning Configuration Form ...
