Cabling Your Cluster Hardware
25
Figure 2-7.
Cabling the Cluster Nodes to a CX3-40f Storage System
NOTE:
If your cluster is attached to Dell|EMC CX3-10c, CX3-20/c, or CX3-40/c
storage systems, you can configure two cluster nodes in a direct-attached
configuration. With the CX3-40f or CX3-80 you can configure four cluster nodes and
with CX3-20f you can configure six cluster nodes in a direct attached configuration.
Cabling a Four-Node Cluster to a CX3-20f, CX3-40f, and CX3-80 Storage System
1
Connect cluster node 1 to the storage system:
a
Install a cable from cluster node 1 HBA port 0 to SP-A
Fibre port 0
(first Fibre Channel port
).
b
Install a cable from cluster node 1 HBA port 1 to SP-B
Fibre port 0
(first Fibre Channel port
).
2
Connect cluster node 2 to the storage system:
a
Install a cable from cluster node 2 HBA port 0 to SP-A
Fibre port 1
(second Fibre Channel port
).
b
Install a cable from cluster node 2 HBA port 1 to SP-B
Fibre port 1
(second Fibre Channel port
).
cluster node 1
cluster node 2
0 1
1 0
HBA ports (2)
HBA ports (2)
CX3-40f storage system
SP-A
SP-B
Содержание EMC CX3 Series
Страница 5: ...Contents 5 A Troubleshooting 57 B Cluster Data Form 63 C Zoning Configuration Form 65 ...
Страница 6: ...6 Contents ...
Страница 16: ...16 Introduction ...
Страница 66: ...66 Zoning Configuration Form ...