Defining one-time settings for performing a Hyper-V export
To define one-time settings for performing a Hyper-V export:
1.
From the Hyper-V dialog box, click
Use local machine
to perform the Hyper-V export to a local
machine with the Hyper-V role assigned.
2.
Click the
Remote host
option to indicate that the Hyper-V server is located on a remote machine. If
you selected the Remote host option, enter the parameters for the remote host described as follows:
Text Box
Description
Host Name
Enter an IP address or host name for the Hyper-V server. It represents the IP
address or host name of the remote Hyper-V server.
Port
Enter a port number for the machine. It represents the port through which the
Core communicates with this machine.
User Name
Enter the user name for the user with administrative privileges for the
workstation with the Hyper-V server. It is used to specify the logon credentials
for the virtual machine.
Password
Enter the password for the user account with administrative privileges on the
workstation with Hyper-V server. It is used to specify the logon credentials for
the virtual machine.
3.
Click
Next
.
4.
On the
Virtual Machines Options
page in the
VM Machine Location
text box, enter the path or
location for the virtual machine. For example, D:\export. The VM location must have sufficient space
to hold the VM metadata and virtual drives needed for the virtual machine.
5.
Enter the name for the virtual machine in the
Virtual Machine Name
text box.
The name that you enter appears in the list of virtual machines in the Hyper-V Manager console.
6.
Click one of the following:
•
Use the same amount of RAM
as the source machine to identify that the RAM use is identical
between the virtual and source machines.
•
Use a specific amount of RAM
to specify how much memory the virtual machine has after the
export; for example, 4096 MB. (recommended)
7.
To specify the disk format, next to
Disk Format
, click one of the following:
•
VHDX
•
VHD
NOTE: Hyper-V Export supports VHDX disk formats if the target machine is running Windows 8
(Windows Server 2012) or higher. If the VHDX is not supported for your environment, the option
is disabled.
8.
On the
Volumes
page, select the volume(s) to export. For the virtual machine to be an effective
backup of the protected machine include the protected machine’s boot drive. Example. C:\.
Your selected volumes should be no larger than 2040 GB for VHD. If the selected volumes are larger
than 2040 GB, and the VHD format is selected, you will receive an error.
9.
On the
Summary
page, click
Finish
to complete the wizard and to start the export.
Performing a continuous (virtual standby) Hyper-V export
NOTE: Only the 3 TB with 2 VMs configuration of DL1000 supports the one-time export and
continuous export (virtual standby) capabilities.
65
Содержание DL1000
Страница 1: ...Dell DL1000 Appliance User s Guide ...
