5.
If you want to remove an existing time period from the schedule, clear the check boxes next to each
time period option. Options include the following:
•
Mon - Fri.
This range of time denotes a typical five-day work week.
•
Sat - Sun.
This range of time denotes a typical weekend.
6.
If the weekday start and end times are from 12:00 AM to 11:59 PM, then a single period exists. To
change the start or end time of a defined period, do the following:
a. Select the appropriate time period.
b. Click in the
Start Time
box to change the start time for this period.
c. Drag the Hours and Minutes slider controls as appropriate for the desired start time, and then
click
Done
. To specify the current time, click
Now
.
d. Click in the
End Time
box to change the end time for this period.
The
Choose Time
dialog box appears.
e. Drag the Hours and Minutes slider controls as appropriate for the desired start time, and then
click
Done
. To specify the current time, click
Now
.
f. Change the interval according to your requirements. For example, if defining a peak period.
change the interval from 60 minutes to 20 minutes to take snapshots three times hourly.
7.
If you defined a period other than 12:00 AM to 11:59 PM in Step 6, then if you want backups to occur
in the remaining time ranges, you must add additional periods to define protection by doing the
following:
a. Click
+ Add period
.
Under the appropriate category (weekdays or weekends), a new time period appears. If the first
period started later than 12:00 AM, then AppAssure automatically starts this period at 12:00.
Following the above example, this second period starts at 12:00 AM. You may need to adjust
hours or minutes for the start and end times.
b. Drag the Hours and Minutes slider controls as appropriate for the desired start and end times, as
appropriate.
c. Change the interval according to your requirements. For example, if defining an off-peak period.
change the interval from 60 minutes to 120 minutes to take snapshots every two hours.
8.
If needed, continue to create additional periods, setting start and end times and intervals as
appropriate.
NOTE: If you want to remove a period you have added, click the
X
to the far right of that period.
If you remove a period in error, you can click
Cancel
.
9.
When your protection schedule meets your requirements, click
Apply
.
The
Protection Schedule
dialog box closes.
Configuring protected machine settings
After you add protection for machines in AppAssure, you can modify basic machine configuration
settings (such as name and host name), protection settings (changing the protection schedule for
volumes on the machine, adding or removing volumes, or pausing protection), and more.
Viewing and modifying configuration settings
To view and modify configuration settings:
1.
From the Core Console, navigate to the machine that you want to modify.
2.
Click the
Configuration
→
Settings
.
3.
Click
Change
to modify the machine settings as described in the following table.
39
Содержание DL1000
Страница 1: ...Dell DL1000 Appliance User s Guide ...
