Dell Dimension L c Series Скачать руководство пользователя страница 29

Страница: 29 / 174

Installing Upgrades on the System Board 2-3

)LJXUH5HPRYLQJWKH&RPSXWHU&RYHU

&$87,217RSUHYHQWFXWVNHHS\RXUKDQGVFOHDURIWKHPHWDOHGJHVRQWKH

FKDVVLV

3. Lift the cover out from the curves at the bottom of the chassis.

Replace the computer cover as follows:

Check all cable connections, especially those that might have come loose during

your work. Fold cables and unused connectors out of the way so that they do not

catch on the computer cover or interfere with airflow inside the computer.

2. Check to see that no tools or extra parts (including screws) are left inside the

computer.

3. Place the chassis upright with the front facing you. Align the computer cover so

its bottom hooks fit in the chassis curves.

4. Lift up the cover, making sure to keep the bottom hooks aligned with the curves

in the chassis.

5. Gently squeeze the right and left sides of the computer together until the cover

clicks into position.

release latch

computer cover

Содержание Dimension L c Series















































































































































































Результаты поиска

Содержание Dimension L c Series

Отзывы:

Dell Dimension L c Series, Справочное и ремонтное руководство, Страница: 29 / 174

Результаты поиска

Содержание Dimension L c Series

Отзывы: