background image

D-2

'HOO'LPHQVLRQ/[[[F6\VWHPV5HIHUHQFHDQG7URXEOHVKRRWLQJ*XLGH

Information Technology Equipment (ITE), including peripherals, expansion cards, print-

ers, input/output (I/O) devices, monitors, and so on, that are integrated into or 

connected to the system should match the electromagnetic environment classifica-

tion of the computer system.

$1RWLFH$ERXW6KLHOGHG6LJQDO&DEOHV8VHRQO\VKLHOGHGFDEOHVIRUFRQ

QHFWLQJSHULSKHUDOVWRDQ\'HOOGHYLFHWRUHGXFHWKHSRVVLELOLW\RI

LQWHUIHUHQFHZLWKUDGLRFRPPXQLFDWLRQVVHUYLFHV8VLQJVKLHOGHGFDEOHV

HQVXUHVWKDW\RXPDLQWDLQWKHDSSURSULDWH(0&FODVVLILFDWLRQIRUWKH

LQWHQGHGHQYLURQPHQW)RUSDUDOOHOSULQWHUVDFDEOHLVDYDLODEOHIURP'HOO

&RPSXWHU&RUSRUDWLRQ,I\RXSUHIHU\RXFDQRUGHUDFDEOHIURP'HOO&RP

SXWHU&RUSRUDWLRQRQWKH:RUOG:LGH:HEDWKWWSZZZGHOOFRP

SURGXFWVGHOOZDUHLQGH[KWP

Most Dell computer systems are classified for Class B environments. To determine 

the electromagnetic classification for your system or device, refer to the following 

sections specific for each regulatory agency. Each section provides country-specific 

EMC/EMI or product safety information.

)&&1RWLFHV862QO\

Most Dell computer systems are classified by the Federal Communications Commis-

sion (FCC) as Class B digital devices. However, the inclusion of certain options can 

change the rating of some configurations to Class A. To determine which classification 

applies to your computer system, examine all FCC registration labels located on the 

bottom or back panel of your computer, on card-mounting brackets, and on the cards 

themselves. If any one of the labels carries a Class A rating, your entire system is con-

sidered to be a Class A digital device. If 

all

 labels carry either the Class B rating 

distinguished by either an FCC ID number or the FCC logo, (

), your system is con-

sidered to be a Class B digital device.

Once you have determined your system’s FCC classification, read the appropriate 

FCC notice. Note that FCC regulations provide that changes or modifications not 

expressly approved by Dell Computer Corporation could void your authority to operate 

this equipment.

This device complies with Part 15 of the FCC Rules. Operation is subject to the follow-

ing two conditions:

‡

This device may not cause harmful interference.

‡

This device must accept any interference received, including interference that 

may cause undesired operation.

&ODVV$

This equipment has been tested and found to comply with the limits for a Class A dig-

ital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide 

reasonable protection against harmful interference when the equipment is operated 

in a commercial environment. This equipment generates, uses, and can radiate radio 

frequency energy and, if not installed and used in accordance with the manufacturer’s 

Содержание Dimension L c Series















































































































































































Отзывы: