104
Adding and Replacing Parts
www
.dell.com | support.dell.com
3
If you are replacing a memory module, remove the existing module:
a
Use your fingertips to carefully spread apart the securing clips on each end of the memory
module connector until the module pops up.
b
Remove the module from the connector at a 45-degree angle.
NOTICE:
Make sure that memory modules are installed in both connectors and that they are of the same
capacity. Insert memory modules at a 45-degree angle to avoid damaging the connector.
memory module
securing clips (2 per connector)
G2806bk2.book Page 104 Tuesday, May 25, 2004 8:48 AM