1 notch
2 memory module
3 cutouts (2)
4 crossbar
NOTICE:
To avoid damage to the memory module, press the module straight down into the connector while you apply
equal force to each end of the module.
5. Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
6. Replace the
computer cover
.
NOTICE:
To connect a network cable, first plug the cable into the network port or device and then plug it into the
computer.
7. Connect your computer and devices to electrical outlets, and turn them on.
8. When a message appears stating that memory size has changed, press <F1> to continue.
9. Log on to your computer.
10. Right-click the
My Computer
icon on your Microsoft® Windows® desktop and click
Properties
.
11. Click the
General
tab.
12. To verify that the memory is installed correctly, check the amount of memory (RAM) listed.
Cards
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide
.
Содержание Dimension 5150
Страница 8: ...System Board Components ...
Страница 9: ...Power Supply DC Connector Pin Assignments ...
