Dell DELL-UP2716DA Скачать руководство пользователя

Страница: 30 / 63

| Setting Up the Monitor

NOTE:

To use the Display Rotation function (Landscape versus Portrait view) with

your Dell computer, you require an updated graphics driver that is not included with
this monitor. To download the graphics driver, go to

www.dell.com/support

and see

the Download section for Video Drivers for latest driver updates.

NOTE:

When in the Portrait View Mode, you may experience performance

degradation in graphic-intensive applications (3D Gaming and etc.).

Adjusting the Rotation Display Settings of Your System

After you have rotated your monitor, you need to complete the procedure below to
adjust the Rotation Display Settings of your System.

NOTE:

If you are using the monitor with a non-Dell computer, you need to go the

graphics driver website or your computer manufacturer website for information on
rotating the ’contents’ on your display.

To adjust the Rotation Display Settings:

Right-click on the desktop and click Properties.

Select the Settings tab and click Advanced.

If you have an ATI graphics card, select the Rotation tab and set the preferred

rotation.

If you have an nVidia graphics card, click the nVidia tab, in the left-hand column

select NVRotate, and then select the preferred rotation.

If you have an Intel

graphics card, select the Intel graphics tab, click Graphic

Properties, select the Rotation tab, and then set the preferred rotation.

NOTE:

If you do not see the rotation option or it is not working correctly, go to

www.dell.com/support

and download the latest driver for your graphics card.

Connecting Your Monitor

WARNING: Before you begin any of the procedures in this section, follow the

Safety Instructions

To connect your monitor to the computer:

Turn off your computer.

Connect the mDP-DP/HDMI/USB cable from your monitor to

the computer. (Vertically extend and tilt the monitor completely to rotate it for
cable connection. See

Rotating the Monitor.

)

Switch on your monitor.

Select the correct input source at Monitor OSD Menu and turn on your

computer.

NOTE:

UP2716DA default setting is DP 1.2. DP 1.1 Graphic card may not display

normally. Please refer to “

product specific problems – No image when using DP

connection to the PC

” to change default setting.

Содержание DELL-UP2716DA
































































Результаты поиска

Содержание DELL-UP2716DA

Отзывы:

Похожие инструкции для DELL-UP2716DA

Бренды по названию

Популярные бренды

Dell DELL-UP2716DA, Руководство пользователя

Результаты поиска

Содержание DELL-UP2716DA

Отзывы:

Похожие инструкции для DELL-UP2716DA

Бренды по названию

Популярные бренды