Adding and Replacing Parts: Dell Latitude D620 User's Guide
NOTICE:
If you need to install memory modules in two connectors, install a memory module in the
connector labeled "DIMMA" before you install a module in the connector labeled "DIMMB." Insert
memory modules at a 45-degree angle to avoid damaging the connector.
1. Follow the procedures in
Before You Begin
.
2. Turn the computer bottom-side up, loosen the captive screw in the memory module cover, and then
remove the cover.
1
memory module cover
2
captive screw
NOTICE:
To prevent damage to the memory module connector, do not use tools to spread the
memory-module securing clips.
3. If you are replacing a memory module, ground yourself and remove the existing module:
a. Use your fingertips to carefully spread apart the securing clips on each end of the memory
module connector until the module pops up.
b. Remove the module from the connector.
file:///S|/Integration%20Specialist/Hardware%20Docu...ation/Kim%20&%20Jay/Dell%20Laptops/D620UG/parts.htm (12 of 24) [12/4/2008 10:54:19 AM]