Dell D15S Скачать руководство пользователя страница 76 | Manualshive

Страница: 76 / 91

background image

Table 19. Connection (continued)

Options

Description

●

Disabled - The internal LAN is off and not visible to the
operating system.

●

Enabled - The internal LAN is enabled.

●

Enabled with PXE (Selected by defauly) - The internal LAN
is enabled with PXE boot capabilities.

Wireless Device Enable

This section contains a toggle switch that allows the user to
enable or disable WLAN and Bluetooth on the computer. The
options are as follows:

●

WLAN (Enabled by default).

●

Bluetooth (Enabled by default).

Enable UEFI Network Stack

This section contains a toggle switch that allows the user to
enable or disable installation of UEFI networking protocols.
(ON by default)

Wireless Radio Control

This section contains a toggle switch that allows the user
to enable or disable a feature where the system will sense
a connection to a wired network and disable the WLAN or
WWAN connection (OFF by default).

HTTP(s) Boot Feature

HTTP(s) Boot Feature

This section contains a toggle switch that allows the user to
enable or disable HTTP(s) Boot capabilities (ON by default).

HTTP(s) Boot Modes

●

Auto Mode - HTTP(s) Boot automatically extracts Boot
URL from DHCP(Dynamic Host Configuration Protocol) -
Selected by default.

●

Manual Mode - HTTP(s) Boot reads Boot URL provided by
the user.

This section also contains an "Upload" and "Delete" option for
provisioning of the certificates required to connect to HTTPs
Boot server.

Power

This section provides power details and settings.

Table 20. Power

Options

Description

USB Wake Support

Enable USB Wake Support

This section contains a toggle switch to allow the user to
enable or disable USB Wake Support. It allows the system
to use USB devices like a mouse and keyboard to wake the
system from standby mode (OFF by default).

NOTE:

This feature only works if the power adapter is

connected to the system.

AC Behavior

This section allows the user to control the behavior of the
system when power is restored after an unexpected loss of
power. The options here are:

●

Power Off - System stays off after AC power is restored
(Selected by default)

76

System setup

«
...
74
75
76
77
78
...
»

Содержание D15S




























































































Отзывы:

Нет отзывов

Похожие инструкции для D15S

Бренд: Olivetti Страницы: 111

Бренд: Gigabyte Страницы: 34

Бренд: Gateway Страницы: 176

Ultra Box nForce SLI Socket Barebone 939

Бренд: Ultra Products Страницы: 1

Бренд: Onyx Страницы: 42

Бренд: Asus Страницы: 80

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 56

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 69

Бренд: Asus Страницы: 28

Бренд: Asus Страницы: 28

Бренд: Asus Страницы: 35

Бренд: Asus Страницы: 2

Chromebox CN Series

Бренд: Asus Страницы: 34

Бренд: Asus Страницы: 2

Бренд: Asus Страницы: 2

Бренд: Asus Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды