Dell Alienware M11x Скачать руководство пользователя

Страница: 8 / 39

Back to Contents Page

Internal Card With Bluetooth

Wireless Technology

Alienware

M11x Service Manual

Removing the Bluetooth Card

Replacing the Bluetooth Card

If you ordered a card with Bluetooth wireless technology with your computer, it is already installed.

Removing the Bluetooth Card

Follow the instructions in

Before You Begin

Remove the base cover (see

Removing the Base Cover

Remove the battery pack (see

Removing the Battery Pack

Remove the hinge cover (see

Removing the Hinge Cover

Remove the keyboard (see

Removing the Keyboard

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

Remove the screw that secures the Bluetooth card to the system board.

Lift the Bluetooth card to disconnect it from the connector on the system board.

Replacing the Bluetooth Card

Follow the instructions in

Before You Begin

Align the connector on the Bluetooth card with the connector on the system board and press gently.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery Pack

) before working inside the

computer.

screw

Bluetooth card

Содержание Alienware M11x








































Результаты поиска

Содержание Alienware M11x

Отзывы:

Похожие инструкции для Alienware M11x

Бренды по названию

Популярные бренды

Dell Alienware M11x, Руководство по обслуживанию

Результаты поиска

Содержание Alienware M11x

Отзывы:

Похожие инструкции для Alienware M11x

Бренды по названию

Популярные бренды