Dell Alienware M11x Скачать руководство пользователя

Страница: 12 / 39

Back to Contents Page

Display Assembly

Alienware

M11x Service Manual

Removing the Display Assembly

Replacing the Display Assembly

Removing the Display Assembly

Follow the instructions in

Before You Begin

Remove the base cover (see

Removing the Base Cover

Remove the battery pack (see

Removing the Battery Pack

Disconnect the antenna cables from the Mini-Card(s).

Note the routing of the Mini-Card antenna cables and remove them from the routing guides on the computer.

Turn the computer over and open the display as far as possible.

Remove the hinge cover (see

Removing the Hinge Cover

Remove the keyboard (see

Removing the Keyboard

Remove the palm rest assembly (see

Removing the Palm Rest Assembly

10.

Pull the pull-tab to disconnect the display cable from the connector on the system board.

11.

Remove the four screws that secure the display assembly to the computer base.

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™

is not covered by your warranty.

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery Pack

) before working inside the

computer.

Содержание Alienware M11x








































Результаты поиска

Содержание Alienware M11x

Отзывы:

Похожие инструкции для Alienware M11x

Бренды по названию

Популярные бренды

Dell Alienware M11x, Руководство по обслуживанию

Результаты поиска

Содержание Alienware M11x

Отзывы:

Похожие инструкции для Alienware M11x

Бренды по названию

Популярные бренды