Dell Alienware Area-51m Скачать руководство пользователя страница 32

Страница: 32 / 111

5 Replace the screw (M2x3) that secures the M.2 thermal shield to the palm-rest assembly and system board.

Procedure to replace M.2 2280 card

NOTE: This procedure applies only to computers shipped with a M.2 2280 card installed.

NOTE: Depending on the configuration ordered, the computer may have up to two M.2 cards installed. Supported

card configurations per M.2 card slot:

•

M.2 2230 solid-state drive

•

M.2 2280 solid-state drive/Intel Optane storage

NOTE: Install the solid-state drive to the SSD1 slot before installing the solid-state drive to the SSD2 slot on the

system board.

Align the notch on the M.2 2280 solid-state drive with the tab on the M.2 solid-state drive slot on the system board.

2 Slide the M.2 2280 solid-state drive into the M.2 solid-state drive slot on the system board.
3 Align the screw holes on the thermal shield with the screw holes on the computer base.

Содержание Alienware Area-51m
















































































































Результаты поиска

Содержание Alienware Area-51m

Отзывы:

Dell Alienware Area-51m, Руководство по обслуживанию, Страница: 32 / 111

Результаты поиска

Содержание Alienware Area-51m

Отзывы: