Dell Alienware Area-51m Скачать руководство пользователя страница 104

Страница: 104 / 111

System Configuration

Enable External USB Port

Enable or disable booting from USB mass storage devices connected to

external USB port.

Audio

Enable or disable the integrated audio controller.

Keyboard Illumination

Enables you to choose the operating mode of the keyboard illumination

feature.

Keyboard Backlight Timeout on AC

When the backlight is enabled, this feature defines the timeout value for the

keyboard backlight when an AC adapter is plugged into the computer.

Keyboard Backlight Timeout on Battery When the backlight is enabled, this feature defines the timeout value for the

keyboard backlight when the computer is running only on battery power.

Miscellaneous Devices

Enable or disable various onboard devices.

Table 5. System setup options—Video menu

Video

LCD Brightness

Set the panel brightness independently for Battery and AC power.

Dynamic Backlight Control

Enable or disable the dynamic backlight control.

Table 6. System setup options—Security menu

Security

Admin Password

Set, change, or delete the administrator password.

System Password

Set, change, or delete the system password.

Internal HDD-0 Password

Set, change, or delete the internal hard-disk drive password.

Strong Password

Enable or disable strong passwords.

Password Configuration

Control the minimum and maximum number of characters allowed for Admin

and System passwords.

Password Bypass

Bypass the System (Boot) Password and the internal HDD password prompts

during a system restart.

Password Change

Enable or disable changes to the System and Hard Disk passwords when an

administrator password is set.

Non-Admin Setup Changes

Determines whether changes to the setup option are permitted when an

administrator password is set.

UEFI Capsule Firmware Updates

Enable or disable BIOS updates through UEFI capsule update packages.

PTT Security

Enable or disable Platform Trust Technology (PTT) visibility to the operating

system.

Computrace(R)

Enable or disable the BIOS module interface of the optional Computrace(R)

Service from Absolute Software.

Admin Setup Lockout

Enable to prevent users from entering Setup when an Admin Password is set.

Master Password Lockout

Disables the master password support. Hard Disk passwords need to be

cleared before changing the setting.

SMM Security Mitigation

Enable or disable the SMM Security Mitigation.

104

Содержание Alienware Area-51m
















































































































Результаты поиска

Содержание Alienware Area-51m

Отзывы:

Dell Alienware Area-51m, Руководство по обслуживанию, Страница: 104 / 111

Результаты поиска

Содержание Alienware Area-51m

Отзывы: