Dell 3130cn - Color Laser Printer, Руководство по обслуживанию

Страница: 454 / 854

2 - 100
Chapter 2 Operation of Diag.
Version 3 2008.05.30
EXIT CLUTCH ON
1) Turn on the power and enter the CE Diag.
2) Execute the EXIT CLUTCH ON. Upon hitting the Start but-
ton, the operating noise of the clutch will be heard.
3) Click the stop button to stop the clutch.
Combination test is as follows.
NOTE: The exit roll rotates when the MAIN MOTOR (FULL) and the
EXIT CLUTCH ON are executed. This procedure is for the technical
staff.
1) Turn on the power and enter the CE Diag.
2) Execute the MAIN MOTOR (FULL) and the EXIT CLUTCH
ON.
3) Confirm the Exit Roll rotation.
4) Click the stop button to stop the clutch.
DUPLEX FAN ON
NOTE:This procedure is for the technical staff. The customer check
are the procedure 1, 4 and 5.
When performing operation for five minutes or longer with the front
cover open, remove all toner cartridges, and cover the drum to avoid
exposure to light.
1) Turn on the power and enter the CE Diag.
2) Open the Front Cover.
3) Cheat the safety Interlock System.
4) Execute the DUPLEX FAN ON. (The customer can confirm
the fan noise only.)
5) Click the stop button to stop the test.
6) Remove the cheater and close the Front Cover.
BUZZER ON
1) Turn on the power and enter the CE Diag.
2) Execute the BUZZER ON.
3) Check the Buzzer Tone.
4) Click the stop button to stop the test.
Item Confirmation procedure
Zna02039KA
Exit Roll
Zna02040KA
Duplex Fan