manualshive.com logo in svg

Dell 3130cn - Color Laser Printer, Руководство по обслуживанию

Поделиться
Скачать
Dell 3130cn - Color Laser Printer Скачать руководство пользователя страница 439

2 - 85

Chapter 2 Operation of Diag.

Version 3   2008.05.30

PH MOTOR ON (FULL/
HALF)

NOTE: This procedure is for the technical staff.  The customer check 
are the procedure 1, 4 and 5.  The PH motor is in the FEED DRIVE.

When performing operation for five minutes or longer with the 
front cover open, remove all toner cartridges, and cover the drum 
to avoid exposure to light.
1) Turn on the power and enter the CE Diag.
2) Open the Front Cover.
3) Cheat the safety Interlock System.
4) Execute the PH MOTOR ON (FULL).  (The customer can con-

firm the motor noise only.)

5) Click the stop button to stop test.
6) Remove the cheater.
7) Close the Front Cover.

DUPLEX MOTOR ON 
(FULL/HALF)

NOTE: This procedure is for the technical staff.  The customer check 
are the procedure 1, 5 and 6.  The DEVE motor is in the DUPLEX 
MODULE.
When performing operation for five minutes or longer with the front 
cover open, remove all toner cartridges, and cover the drum to avoid 
exposure to light.

1) Turn on the power and enter the CE Diag.
2) Open the Front Cover.
3) Cheat the safety Interlock System.
4) Remove the transfer belt.
5) Execute the DUPLEX MOTOR ON (FULL).  (The customer 

can confirm the motor noise only.)

6) Click the stop button to stop test.
7) Remove the cheater and replace the transfer belt.
8) Close the Front Cover.

Item

Confirmation procedure

Zna02019KA

Kmy02021KA

Duplex Roll

Содержание 3130cn - Color Laser Printer























































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды