Dell 3130cn - Color Laser Printer, Руководство по обслуживанию

Страница: 316 / 854

1 - 290
Chapter 1 Troubleshooting
Version 3 2008.05.30
FIP-1.P2 Blank print (No print)
Trouble substance
The entire paper is printed pure white.
Possible causative parts
- TRANSFER ASSY (PL4.1.1)
- DISPENSER ASSY (PL5.1.12)
- HVPS (PL5.1.17)
- CARTRIDGE ASSY (PL5.1.18(K)/PL5.1.19 (C)/PL5.1.20 (M)/PL5.1.21 (Y))
- KIT ROS ASSY (PL5.1.99)
- PWBA MCU (PL9.1.20)
- PWBA ESS (PL9.1.27)
Before commencing troubleshooting, check the paper transfer path. Make sure there is no foreign
materials on the transfer path, such as staples, paper clips, scraps of paper and so on.
Step Check Yes No
1
Checking the blank print.
Print the Contamination Check page.
Is the image printed correctly?
Check the print
data which the
problem gener-
ated.
Go to step 2.
2
Checking the print cartridge installation.
Is the installed print cartridge the DELL cartridge?
Go to step 3.
Replace to the
DELL cartridge
and print ten
sheets [Test
Print]-[Toner Pal-
let Check] in diag-
nosis.
3
Checking the paper
Is the installed paper with a new and dry one?
Go to step 4.
Replace the
paper with a new
and dry.
4
Checking the Test Pattern.
Is the image printed correctly?
Checked by [Test Print] - [Test Pattern 600] in diagnosis.
Replace the
PWBA ESS.
(Refer to Removal
26/Replacement
18)
Go to step 5.
5
Checking the laser beam path.
Are there any foreign substance between the ROS ASSY
and the drum?
Remove the for-
eign substance
Go to step 6.
6
Checking the connection of the ROS ASSY.
Reseat the connector (P/J 151) of the ROS ASSY.
Is the image printed correctly?
End of work. Go to step 7.
7
Checking the TRANSFER ASSY installation
Reseat the TRANSFER ASSY.
Is the image printed correctly?
End of work. Go to step 8.