Dell 3100cn - Color Laser Printer Скачать руководство пользователя страница 201

Страница: 201 / 219

Loading Print Media

Proper print media loading helps prevent jams and ensures trouble-free printing.

Before loading print media, identify the recommended print side of the print media. This information is usually on the print media package.

Loading Print Media in Standard and Optional Trays

Multipurpose Feeder

Loading the Multipurpose Feeder

Using the Multipurpose Feeder

Linking Trays

Using the Duplex Function

Using the Center Output Tray

Using the Support Extension

Loading Print Media in Standard and Optional Trays

All trays are loaded the same way.

Remove the tray.

Slide the width guides to the edge of the tray. The width guides should be fully extended.

Squeeze the length guide and slide it to the edge of the tray.

NOTE:

To avoid paper jams, do not remove trays while a job prints.

Содержание 3100cn - Color Laser Printer




























































































































































































































Результаты поиска

Содержание 3100cn - Color Laser Printer

Отзывы:

Бренды по названию

Популярные бренды

Dell 3100cn - Color Laser Printer, Руководство пользователя

Результаты поиска

Содержание 3100cn - Color Laser Printer

Отзывы:

Бренды по названию

Популярные бренды